HiBy CR06 Dock User Manual
introduce
- HiBy CR06 is a desktop output bridge device used for ** output transfer with playback equipment;
- The output audio bridge methods include:
- 3.5mm to RCA output; (DAP 3.5mm is connected to CR06 3.5mm, other devices are connected to CR06 RCA output)
- 4.4mm to XLR output; (DAP 4.4mm is connected to CR06 4.4mm, other devices are connected to CR06 XLR output)
- USB Type-C SPDIF signal to coaxial and fiber optic; (DAP Type-C is connected to CR06 Type-C, and other devices are connected to CR06 coaxial port or fiber optic port)
- USB Type-C USB audio signal; (DAP Type-C is connected to CR06 Type-C, and other devices are connected to CR06 Port A)
- Can read USB drive and hard disk; (DAP Type-C is connected to CR06 Type-C, and other devices are connected to CR06 Port A)
- Passive heat dissipation, so it is more suitable for scenes where players with low heat generation play while charging;
- There is a Logo indicator at the bottom;
The base is mainly used for signal bridging, so it only performs interface conversion, does not perform any signal conversion, and does not change the level, and depends entirely on the input signal
Hardware platform
| Category | Chip/Function |
|---|---|
| Main chip | LDR6282 |
| USB (USB A) | USB storage devices: such as USB disk, mobile hard disk, etc., decoder: such as HiBy FC4, etc. |
| USB (Type-C) | Connect to players such as HiBy RS8\HiBy R6III\HiBy R6PRO II, etc |
| RCA | You need to connect the player to the recording cable to get a signal |
| XLR | You need to use 4.4mm to connect the player to the cable to get a signal |
| Coaxial (SPDIF) | You need to connect to the player with TypeC to get a signal (maximum is PCM 192kHz, DoP64) |
| Fiber Optical (SPDIF) | You need to connect to the player with TypeC to get a signal (maximum is PCM 96kHz) |